Bluetooth connectivity to the Playstation from the Woojer is currently not possible out of the box, as the Playstation does not allow for Bluetooth connectivity to external audio devices. Please check out the connection methods below instead. 

TABLE OF CONTENTS

• Connecting with a 3.5mm cable through your controller
• Connecting Bluetooth headphones to the Woojer

Connecting with a 3.5mm cable to your PS5 DualSense controller

1. Press and hold the Woojer's power button for 5 seconds until the Woojer turns on.
2. Connect a 3.5mm auxiliary cable. One end goes to your DualSense controller's 3.5mm output jack, and the other end goes to your Woojer's dedicated audio input jack
3. Connect your headphones to the Woojer, using either a 3.5mm cable or using wireless Bluetooth. You can learn more about connecting your headphones using Bluetooth at the bottom of this article. 

On your Woojer Series 4, the left side of the LED ring indicator should switch from blinking blue to solid blue, confirming that an audio source is connected.
We recommend using the High-Quality 3.5mm auxiliary audio cable offered on our website.

Connecting Bluetooth headphones to the Woojer

1. Turn on your Woojer.
2. Press and hold the power button AND the volume up button of your Woojer for 5 seconds simultaneously.
   The right side of the LED ring will begin to blink rapidly with red and blue, indicating the headphones pairing mode.
3. Set your Bluetooth headphones into pairing mode and place them near the Woojer. 
4. Both devices will pair within 30 seconds.
5. Once paired, the he right side of the LED ring will become solid blue, confirming the connection to an audio output.