Woojer Series 4 devices can be connected to your Nintendo Switch using either a 3.5mm auxiliary audio cable or using wireless Bluetooth. Below you will find instructions on how to connect your Woojer to your Nintendo Switch using these different methods.

All information presented in this article reflects the manual pairing instructions. You can also connect and pair Bluetooth headphones to your Woojer using the dedicated Woojer application. See more information here.

TABLE OF CONTENTS

• Connecting with a 3.5mm cable to your Nintendo Switch
• Connecting with Wireless Bluetooth to your Nintendo Switch
• Connecting Bluetooth headphones to the Woojer

Connecting with a 3.5mm cable to your Nintendo Switch

1. Press and hold the Woojer's power button for 3 seconds until the Woojer turns on.
2. Connect the 3.5mm auxiliary cable. One end goes to your Nintendo Switch 3.5mm audio output jack, and the other end goes to your Woojer's dedicated audio input jack.
3. Connect your headphones to the Woojer, using either a 3.5mm cable or using wireless Bluetooth. You can learn more about connecting your headphones using Bluetooth at the bottom of this article.

On your Woojer Series 4, the left side of the LED ring indicator should switch from blinking blue to solid blue, confirming that an audio source is connected.
We recommend using the High-Quality 3.5mm auxiliary audio cable offered on our website.

Connecting with Wireless Bluetooth to your Nintendo Switch

1. Keep the power button on your Woojer pressed while turning it on until you see the left side of the LED ring start blinking red and blue, indicating that the device is currently in pairing mode.
2. Access your Nintendo Switch's Bluetooth settings and locate the "Woojer Strap 4" or "Woojer Vest 4" to initiate pairing with the device.
3. Once paired, the left side of the LED ring indicator should switch from blinking blue to solid blue, confirming that an audio source is connected.
4. Connect your headphones to the Woojer, using either a 3.5mm cable or using wireless Bluetooth. You can learn more about connecting your headphones using Bluetooth at the bottom of this article. 

Connecting Bluetooth headphones to the Woojer

1. Turn on your Woojer.
2. Press and hold the power button AND the volume up button of your Woojer for 5 seconds simultaneously.
   The right side of the LED ring will begin to blink rapidly with red and blue, indicating the headphones pairing mode.
3. Set your Bluetooth headphones into pairing mode and place them near the Woojer. 
4. Both devices will pair within 30 seconds.
5. Once paired, the he right side of the LED ring will become solid blue, confirming the connection to an audio output.