Woojer Series 4 devices can be connected to a source device using either a 3.5mm auxiliary audio cable, a USB-C cable, or using wireless Bluetooth. Below you will find instructions on how to connect your Woojer to your Mac using these different methods.

All information presented in this article reflects the manual pairing instructions. You can also connect and pair to your Woojer using the dedicated Woojer application. See more information here.

TABLE OF CONTENTS

• Connecting with a 3.5mm cable to your Mac
• Connecting with a USB-C Cable to your Mac
• Connecting with Wireless Bluetooth to your Mac
• Connecting Bluetooth headphones to the Woojer Series 4

Connecting with a 3.5mm cable to your Mac

1. Press and hold the Woojer's power button for 3 seconds until the Woojer turns on.
2. Connect the 3.5mm auxiliary cable. One end goes to your Mac 3.5mm output jack, and the other end goes to your Woojer's dedicated audio input jack.
3. Connect your headphones to the Woojer, using either a 3.5mm cable or using wireless Bluetooth. You can learn more about connecting your headphones using Bluetooth at the bottom of this article. 

On your Woojer Series 4, the left side of the LED ring indicator should switch from blinking blue to solid blue, confirming that an audio source is connected.
We recommend using the High-Quality 3.5mm auxiliary audio cable offered on our website.

Connecting with a USB-C Cable to your Mac

1. Press and hold the Woojer's power button for 5 seconds until the Woojer turns on.
2. Connect a USB-C cable. One end goes to your Mac's USB-C output, and the other end goes to your Woojer's dedicated USB-C audio input.
3. Connect your headphones to the Woojer, using either a 3.5mm cable or using wireless Bluetooth. You can learn more about connecting your headphones using Bluetooth at the bottom of this article.

On the Woojer Strap 4, only a single USB-C input is available.

On the Woojer Vest 4, utilize the FRONT USB-C input. The BACK USB-C input is used for charging only. 

On your Woojer Series 4, the left side of the LED ring indicator should switch from blinking blue to solid blue, confirming that an audio source is connected.

Connecting with Wireless Bluetooth to your Mac

1. Turn the Woojer device on.
2. Access your Mac's Bluetooth settings and locate the "Woojer Strap 4" or "Woojer Vest 4" to initiate pairing with the device.
3. Once paired, the left side of the LED ring indicator should switch from blinking blue to solid blue, confirming that an audio source is connected.
4. Connect your headphones to the Woojer, using either a 3.5mm cable or using wireless Bluetooth. You can learn more about connecting your headphones using Bluetooth at the bottom of this article. 

Connecting Bluetooth headphones to the Woojer

1. Turn on your Woojer.
2. Press and hold the power button AND the volume up button of your Woojer for 5 seconds simultaneously.
   The right side of the LED ring will begin to blink rapidly with red and blue, indicating the headphones pairing mode.
3. Set your Bluetooth headphones into pairing mode and place them near the Woojer. 
4. Both devices will pair within 30 seconds.
5. Once paired, the he right side of the LED ring will become solid blue, confirming the connection to an audio output.