Woojer Series 4 devices can be connected to a source device using either a 3.5mm auxiliary audio cable, a USB-C cable, or using wireless Bluetooth. Below you will find instructions on how to connect your Woojer to your Android device using these different methods.

All information presented in this article reflects the manual pairing instructions. You can also connect and pair to your Woojer using the dedicated Woojer application. See more information here.

TABLE OF CONTENTS

• Connecting with a 3.5mm cable to your Android
• Connecting with Wireless Bluetooth to your Android
  • Connecting the Woojer Strap 4 with Wireless Bluetooth
  • Connecting the Woojer Vest 4 with Wireless Bluetooth
• Connecting Bluetooth headphones to the Woojer

Connecting with a 3.5mm cable to your Android

1. Press and hold the Woojer's power button for 3 seconds until the Woojer turns on.
2. Connect a 3.5mm auxiliary cable. One end goes to your mobile device's 3.5mm output jack, and the other end goes to your Woojer's dedicated audio input jack
3. Connect your headphones to the Woojer, using either a 3.5mm cable or using wireless Bluetooth. You can learn more about connecting your headphones using Bluetooth at the bottom of this article.

If you're using an Android device that doesn't have a 3.5mm audio jack, you can either use an alternate connection option, or utilize a USB-C to 3.5mm adapter.

Connecting with Wireless Bluetooth to your Android

Due to differences between the Woojer Strap 4 and the Woojer Vest 4, the following instructions are split per product.

Connecting the Woojer Strap 4 with Wireless Bluetooth

1. Turn the Woojer Strap 4 on.
2. Access your Android device's Bluetooth settings and locate the "Woojer Strap 4" to initiate pairing with the device.
3. Once paired, the left side of the LED ring will become solid blue, confirming the connection to an audio output.
4. Connect your headphones to the Woojer, using either a 3.5mm cable or using wireless Bluetooth. You can learn more about connecting your headphones using Bluetooth at the bottom of this article. 

Connecting the Woojer Vest 4 with Wireless Bluetooth

1. Turn the Woojer Vest 4 on.
2. Access your Android device's Bluetooth settings and locate the "Woojer Vest 4" to initiate pairing with the device.
3. Once paired, the left side of the LED ring will become solid blue, confirming the connection to an audio output.
4. Connect your headphones to the Woojer, using either a 3.5mm cable or using wireless Bluetooth. You can learn more about connecting your headphones using Bluetooth at the bottom of this article. 

Connecting Bluetooth headphones to the Woojer

1. Turn on your Woojer.
2. Press and hold the power button AND the volume up button of your Woojer for 5 seconds simultaneously.
   The right side of the LED ring will begin to blink rapidly with red and blue, indicating the headphones pairing mode.
3. Set your Bluetooth headphones into pairing mode and place them near the Woojer. 
4. Both devices will pair within 30 seconds.
5. Once paired, the he right side of the LED ring will become solid blue, confirming the connection to an audio output.