Congratulations! You've received your Woojer Strap 4! 

Please review the following information carefully before the first use of your Woojer Strap 4. You can also find this information in the Woojer Strap 4 User Manual.

You can find additional information about how to connect to various source devices (like PCs, mobile devices, gaming consoles, VR headsets and more) by referring to the Woojer Series 4 section on our support portal.  

Most, if not all options presented in this guide are also easily accessible through the dedicated Woojer app, which is available here.

We also highly recommend that you check out our Getting Started videos which are available on this dedicated page.

TABLE OF CONTENTS

• Charging the Woojer Strap 4
• Connecting to the Woojer Strap 4
  • Connecting your audio source using Bluetooth
  • Connecting your headphones
  • Connecting your Bluetooth headphones
• Wearing the Woojer Strap 4
• Fine Tune your Woojer Strap 4

Charging the Woojer Strap 4

Before using the Woojer Strap 3 for the first time, please connect it to any standard 5v charger (like a mobile phone charger) for up to 2 hours.  

Connecting to the Woojer Strap 4

The Woojer Strap 3 can be connected to an audio source device using one of the following connectivity options:

• Use an analog 3.5mm cable from the Woojer Strap 4 to your source device.
• Use a USB-C cable from the Woojer Strap 4 to your source device.
• Wireless pairing using A2DP Bluetooth.

Connecting your audio source using Bluetooth

1. Turn on the Woojer Strap 4.
2. On your source device, enter your Bluetooth options and locate the "Woojer Strap 4" to initiate the pairing.  
3. Once paired, the left LED indicator will change to solid blue. 

Connecting your headphones

The Woojer Strap 4 can also be connected to an audio output device using the following connectivity options:

• Use an analog 3.5mm cable from the Woojer Strap 4 to your audio output device. 
• Wireless pairing to Bluetooth headsets/speakers using A2DP Bluetooth.

Connecting your Bluetooth headphones

1. Turn on your Woojer Strap 4.
2. Press and hold the power button AND the volume up button of your Woojer for 5 seconds simultaneously.
   The right side of the LED ring will begin to blink rapidly with red and blue, indicating the headphones pairing mode.
3. Set your Bluetooth headphones into pairing mode and place them near the Woojer. 
4. Both devices will pair within 30 seconds.
5. Once paired, the he right side of the LED ring will become solid blue, confirming the connection to an audio output.

Wearing the Woojer Strap 4

The Woojer Strap 4 can be worn diagonally or vertically across the chest, on your waist, or on your spine.

Fine Tune your Woojer Strap 4

You can control and adjust the headphone volume output, as well as the haptic response strength of the Woojer Strap 4 using the dedicated control buttons in the middle of the device. 

To optimize your Woojer experience, and access additional features like audio-haptic synchronization, please launch the dedicated Woojer app.